SIM900A GPRS Module TC35

Product Description

SIM900A GPRS Module TC35

Wiring:

I VBTA, GND of power supply (VBTA must be 3.5-4.5V 1A above ), VBTA a pin three by one on the line . But the power of your microcontroller MCU GND and the ground should be connected , then the map arbitrary GND on the line .

Cross Connection II Note : RXD0 pick 3.3V MCU TXD pin , TXD0 pick 3.3V microcontroller RXD pin , computer debug module (usb turn TTL, 232 rpm TTL) , it is also a cross- wiring. Not very familiar with serial communication students pay attention ! ( Used with a serial microcontroller development board to know when the debug module : computers and microcontrollers is a cross- wiring, so MCU control and the use of computer control module wiring sequence is not the same ) .

III S_POWER_KEY can VBTA short , you can also use single-chip high-level control .

Not shown on the schematic several other pin is of no use , and imitation is fixed firmly to plug opposite. The module does not lead voice interface , you can call, but not interactive voice . The main application of the vast majority of projects are texting and GPRS function, voice calls do not have much practical significance.

5 , LED: power indicator, signal indicator module , serial communication instructions

6 , clamshell SIM card connector with EMI immunity circuitry.

7 , the core plate with mounting holes , and auxiliary fixed pin , can be embedded directly into your production were to go , convenient, stable and fast.

Abbiamo disponibili datasheet di tutti i componenti, qualora non fosse presente nella scheda download del prodotto inviaci un messaggio dal modulo contattaci e lo pubblicheremo il prima possibile nel nostro sito.