L298N Dual Stepper Motor Driver Controller Board Module 5V For Robot Smart Car

Product Description

L298N Dual Stepper Motor Driver Controller Board Module 5V For Robot Smart Car

The L298N driver module, using ST’ L298N chip, can directly drive two 3-30V DC motor, and provide a 5V output interface, power for 5V single-chip circuitry , support 3.3VMCU control. you can easily control the DC motor speed and direction, also control the 2-phase stepper motor. It is essential for making a smart car.

Features:

•     Driver: L298N Dual H Bridge DC Motor Driver IC
•     Driven part of the terminal supply area Vs: +5 V ~ +35 V; such as the need to take power within the board, the supply area Vs: +7 V ~ +35 V
•     Driven part of the peak current Io: 2A
•     The logical part of the terminal supply area Vss: +5 V ~ +7 V (can take power within the board +5 V)
•     The logical part of the operating current range: 0 ~ 36mA
•     Control signal input voltage range:
•     Low:-0.3V ? Vin ? 1.5V
•     High: 2.3V ? Vin ? Vss
•     Enable signal input voltage range:
•     Low: -0.3 ? Vin ? 1.5V (control signal is invalid)
•     High: 2.3V ? Vin ? Vss (control signal active)
•     Maximum power consumption: 20W (when the temperature T = 75 ?)
•     Storage temperature: -25 ? ~ +130 ?
•     Other Extensions: control of direction indicators, the logic part of the plate to take power interface.
•     Driver Board Size: 55mm x 49mm x 33mm (with fixed copper pillar and the heat sink height)

Abbiamo disponibili datasheet di tutti i componenti, qualora non fosse presente nella scheda download del prodotto inviaci un messaggio dal modulo contattaci e lo pubblicheremo il prima possibile nel nostro sito.