-€3,00

HC-06 Bluetooth

Name: HC-06 Bluetooth
SKU: ARD00524
Price: 8.96 EUR
Availability: InStock
Rating: 5 (1 reviews)

SKU: ARD00524

HC-06 Bluetooth

€8,96

Rated 5 out of 5 based on 1 customer rating

(1 customer review)

In stock (can be backordered)

Title	Quantità	Prezzo Unitario
Sconto 10%	12 - 49	10% €8,06
Sconto 20%	50 - 99	20% €7,17
Sconto 30%	100 +	30% €6,27

Product Description

The HC-06 module is a module that allows you to convert a UART serial port into a Bluetooth port; this device can be used to allow communication between a microprocessor (MCU), mounted for example on an Arduino board, and a device equipped with Bluetooth communication, such as a PC, a Smartphone or a Tablet.

The HC-06 module operates only in Slave mode: this allows to use the module to create, for example, a network between a robot containing the HC-06 module, then set as Slave, and a notebook set as Master.

This module is based on the CSR Bluecore 04 External chip with CMOS technology and AFH (Adaptive Frequency Hopping Feature) and is compatible with the Bluetooth protocol V2.0 3Mbps + EDR (Enhanced Data Rate).
Specifications
Mode: SOLO Slave only
Chip: CSR Bluecore 04
USB protocol: Full Speed ??USB1.1, compatible 2.0
Bluetooth name (default): linvor
Password (default): 1234
Working distance: 10 meters
Baud rate (default): 9600
Input voltage: 3.6V ~ 6V
Input current (NON-coupled module): 30mA
Input current (coupled module): 10mA
Pinout: VCC, GND, TXD, RXD
Linear voltage regulator (LDO): 3.3V
Data bit: 8
Stop bit: 1
Parity bit: NO
Baud-rate, Bluetooth name and password: programmable via AT commands (with disconnected module)
Sensitivity: -80dBm
Transmission: up to + 6dBm RF
Antenna: integrated
Connection: automatic to the last device previously connected
Dimensions: 37 x 17 x 7mm
Weight: 4.5g

Default serail port setting : 115200(optional 4800,9600,19200), N, 8, 1

Pairing code : 1234

Running in slave role: Pair with BT dongle and master module

Usage

Coupled Mode: Two modules will establish communication automatically when powered.
PC hosted mode: Pair the module with bluetooth dongle directly as virtual serial.

Bluetooth protocal : Bluetooth Specification v2.0+EDR
Frequency : 2.4GHz ISM band
Modulation : GFSK(Gaussian Frequency Shift Keying)
Emission power : ?4dBm, Class 2
Sensitivity : ?-84dBm at 0.1% BER
Speed : Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps
Security : Authentication and encryption
Profiles : Bluetooth serial port

CSR chip : Bluetooth v2.0
Wave band : 2.4GHz—2.8GHz, ISM Band
Protocol : Bluetooth V2.0
Power Class : (+6dbm)
Reception sensitivity: -85dBm
Voltage : 3.3 (2.7V—4.2V)
Current : Paring – 35mA, Connected – 8mA
Temperature : -40C~ +105C
User defined Baud rate : 4800, 9600, 19200, 38400, 57600, 115200, 230400,
460800,921600 ,1382400.
Dimension : 26.9mm*13mm*2.2mm

Pin definition :

    * PIO8 connects with LED cathodea with 470ohm series resistor in between. LED NEGATIVE connects to ground. It is used to indicate the module state. After powered on, flashing intervals differ in different states.
    * PIO9 is used to control LED indicating paring. It will be steady on when paring is successful.
    * PIO11, module state switching pin. HIGH -> response to AT command; LOW or floating -> regular work status.
    * With build-in reset circuit, reset is completed automatically after powered on.
    * Steps to set to MASTER:
    * Set PIO11 HIGH with a 10K resistor in between.
    * Power on, module comes into AT Command Response Status
    * Open HyperTerminal or other serial tool, set the baud rate 38400, 8 data bits, 1 stop bit, no parity bit, no Flow Control
    * Via serial port, send characters “AT + ROLE = 1 r n”,if successful, return “OK r n”, where r n is carriage return.
    * Set PIO11 LOW, re-power, then in Master state, automatically search for slave module and connect.

Abbiamo disponibili datasheet di tutti i componenti, qualora non fosse presente nella scheda download del prodotto inviaci un messaggio dal modulo contattaci e lo pubblicheremo il prima possibile nel nostro sito.