DL69-2047 multifunction digital AC digital voltmeter ammeter

Product Description

DL69-2047 multifunction digital AC digital voltmeter ammeter

1 measurement accuracy: 1% + 2

2 monitor: voltage and power factor display 4 red LED digital tube of 0.32 inches, current display using the digital, red 0.32 inch LED digital tube.

Active power, electrical energy (power) display 5 bit, green 0.32 inch LED digital tube

3 measuring range: AC voltage: AC80.0-300.0V, (or AC200.0-450.0V, the user when ordering according to need)

AC0.00100.0A: alternating current, current display resolution of 0.01A measuring current is less than 100A, the current display resolution of 0.1A measurement of current is more than 100A, automatic range conversion.

Active power: (measured voltage AC80.0-300.0V) 0.0-30000W (AC200.0-450.0V:45000W)

Electrical energy (power):0.000-99999kwh, decimal point automatic conversion

Power factor: 1.000-0.000

4 measuring speed: about 2 times per second

5 external dimensions: 79 x 43 x 48mm

6 press pack size: 76 * 39mm

Use and connection method

1 according to the wiring diagram wiring drawings, with the current transformer two time end instrument, (green wire) blue terminal received instrument, the middle hole wire will measure the circuit through the current transformer.

2 connect the voltage measuring lead to the green terminal of the instrument. And then pass on the measured voltage. Start reading measurement results.

3 power supply after the meter display display and measurement functions are voltage (V), current (A), active power (W). When press the button on the dashboard left

(SAM CK), the active power meter (W), display changes to display the electric energy (electricity) (KWH), then click the button to change the display power factor (with cos). Press the button again to change back to display active power (W). Press the green button (SAM CK) display digital tube display function according to the cycle shown below:

4 when the need for electricity (electricity) measuring the measurement from zero, press the button (SAM CK) will measure the function conversion to electrical energy (electricity) measurement function, is the instrument display 5 LED digital tube display above the green indicator light on the right side of the function in the position of kwh, and long press the button for 5 seconds (SAM CK), electricity (electricity) display green 5 digital tube display all zero, release the button (SAM CK) power (electricity) display from scratch measurement.

5 electrical energy (electricity) showed a power automatic data storage function, which is when the measured voltage disconnect or power outage, the instrument will automatically save the current electrical energy (electricity) count data, when to pick up the power measurement instrument will continue to accumulate in the original data stored on.