51 Single-chip Microcontroller Development Board Avr Arm STM32

Product Description

51 Single-chip Microcontroller Development Board Avr Arm STM32

The ARM STM32 and 51 MCU perfect compatibility combine , which can be regarded as a professional STM32 development board, also can be regarded as a professional 51 MCU development board, they will bring you new learning experience.
Specfications:
– Use STM32F103C8T6, CPU working frequency can reach 72M,and 1.25 DMIPS/MHZ
–  0 waiting for access memorizer
– single cycle hardware multiplication and division
– 64KB Flash
– 20KB SRAM
– clock,reset and power management
– 0 to 3.6V power supply and the I/O base pin
– power on/power down reset (POR/PDR), Programmable voltage monitor (PVD)
– embedded 4 to 16 MHz high-speed crystal oscillator
– embedded 8 MHz RC oscillator
–  internal 40kHz RC oscillator
–  PLL supply CPU clock 
–  32 kHz RTC oscillator with calibration
–  low-power dissipation (A: 3 kinds of energy saving mode: sleep, stop and standby mode; B:VBAT power supply for the RTC and spare register)
–  debug mode: serial line debugging (SWD) and JTAG debugging interface
–  DMA controller
– 7 channel DMA controller
– Support peripheral: timer, ADC, SPI, I2C and USART
– one of 12-bit A/D converter, 1 us the conversion time (16 channel)
– 17. as many as 80 fast I/O port 
– 26/37/51/80 one of multi-function two-way 5 V compatible I/O port
– All the I/O interface can image to 16 external interruption 
– as many as seven timer
– As many as three 16-bit timer, each timer has up to four for input/output compare/PWM or pulse count channel
– 16-bit 6 channel advanced control timer
A , as many as six road PWM output 
B, dead zone control, edge/middle alignment waveform and emergency braking
– Two 16-bit the watchdog timer (independent and window type) system time timer: 24 bits from minus type 
–  as many as nine communication interface
– two I2C interface (SMBus/PMBus)
– 3 USART interface, support ISO7816, LIN, IrDA interface and demodulation control
– two SPI synchronous serial interface (18 M/SEC)
– CAN interface (2.0 B active)
– USB2.0 interface at full speed
– 20, 2 of 12 A/D converter, 1 us the conversion time (16 channel)
– Conversion range: 0 to 3.6 V
– Double sampling keep function
– The temperature sensor (STM32 cabin temperature sensor)
– Part2 51 MCU
–  Use STC90C516RD
Package including:
– main board × 1
– Include on the main board: 
– STC 90C516RD
– Clock battery
– two-tone 8 * 8 dot matrix
– 12M Crystal Oscillator
– IR receiver
-18B20 Temperature Sensor
– Photosensitive thermosensitive module
– Multi-function folding box × 1
– stepper motor × 1
– DC motor × 1
– IR Remote Controller × 1
– Cable include:
– USB cable × 1
– 8pin flat cable × 4
– dupont line × 8
– 11.0592 MHz Crystal Oscillator × 1
– Spare short circuit cap × 4
– 2.4?TFT LCD ( SD card integration module) × 1
– STM32 core board × 1

Abbiamo disponibili datasheet di tutti i componenti, qualora non fosse presente nella scheda download del prodotto inviaci un messaggio dal modulo contattaci e lo pubblicheremo il prima possibile nel sito.